The BT608 is a touchscreen Battery & Electrical System analyzer that applies Adaptive Conductance, an advanced battery analysis method that produces a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a battery’s true health. The BT608 can display a quick health status of the existing battery, register a new battery and perform advanced battery and electrical system diagnostics. The BT608’s VINscan function enables quick identification of the vehicle and battery specifications. Read/Clear codes on all available vehicles systems. Print or share customized reports via Wi-Fi or print test reports via the built-in thermal printer.

• Support in-vehicle and out-of-vehicle testing of passenger vehicle batteries
• Test 6- and 12-volt batteries: 100 - 3000 CCA
• Test 12- and 24-volt cranking/charging systems
• Test Flooded, AGM, AGM Spiral, EFB, and GEL batteries
• Compatible with CCA, CA, SAE, EN, IEC, DIN, JIS, and MCA
• One-touch Battery registration
• Quick display of battery specifications through battery barcode scan, Auto and manual VIN entry
• Illustration instruction guides for battery positioning and testing
• Print test reports via built-in thermal printer
• Read and erase codes of all available systems

Adaptive Conductance for More Accurate Examinations

The BT608 with an extra screen wiper is a touchscreen Battery & Electrical System analyser that applies adaptive conductance to produce a more accurate examination of the battery’s cold-cranking ability and reserve capacity, vital to determining a battery’s health. Following is the benefits of adaptive conductance technology:

Reduce Battery Misdiagnosis: INTERSTATE Statistics show that 50% of returned batteries are good and just need charging. With adaptive conductance technology adopted in the battery tester BT608E, the diagnostic accuracy rate reaches 94.11%, which is higher than conductance profiling with an accuracy of 92.06%.

Diagnose Low Capacity Batteries: Some misdiagnoses of battery issues occur when the battery tester cannot quickly identify the battery capacity status. The battery tester BT608 can fix the issues with the adaptive conductance for its bad battery detection rate ups to 63.55%, which is about 15% (56.36%) faster than battery testers using conductance profiling.

Reduce Charge & Reset for Discharged Batteries: Some other battery testers cannot perform SOH tests to identify discharge batteries and might do some reset and recharge in vain. With the adaptive conductance technology, the battery tester BT608 can quickly detect the battery SOH and save the diagnostic waiting time

Compared to the conductance profiling technology, adaptive conductance can provide users with more accurate and quicker diagnostics for it uses dynamic load instead of fixed load, which allows adjusting the load according to the environment in the car. Besides, adaptive conductance has 30A discharge (10A for conductance profiling) for a faster battery test.

Intelligent Adaptive Conductance

With the adaptive conductance technology, Autel MaxiBAS BT608E' s testing results accuracy up to about 95% to reduce battery misdiagnosis; bad battery detection rates up to 64% to diagnose low capacity batteries; reduce 30% of charge & retest rate to save time and improve workshop efficiency. After numerous market research and rigorous calculations, Autel ensures to provide accurate battery’s CCA and reserve capacity and provides users with a premium experience.

Auto Battery Registration & Electrical System Reset

Comprehensive ad Autel MaxiBAS BT608 is, it also offer clear battery registration guidance and can complete one-touch registration of new batteries for 53+ vehicle brands. No other registration tool is needed. After the battery replacement, some position settings of the vehicle's electrical components such as sunroof, window, and the door might be lost and need resetting, the BT608E can also complete that task for technicians.

Full Systems Diagnostics & Auto VIN Scan

Like professional scanners, the battery tester Autel MaxiBAS BT608 can also do full system diagnostics, making the tester more than a car battery tester. Connecting the VCI to the OBD DCL, basic information of vehicles will be automatically displayed, saving technicians’ effort to manually input every detail. You can also use the camera to scan the VIN/license to get the info easily (Please note this function is not compatible with all vehicles).

Lifetime Free Update and Print

The Autel car battery tester Autel MaxiBAS BT608 have lifelong free software updates for the operating system/applications/battery testing/battery registration/vehicle manufacturers. The Android-based touchscreen battery testing tool also supports Wi-Fi and Bluetooth connections. The shop-customized reports can be printed out with the built-in thermal printer. No other printing materials except the standard thermal paper are needed.

Bluetooth & Wi-Fi Wireless Connection

There is a VCI device available with the battery tester BT608. Technicians and DIYers can connect the VCI to the vehicle and enter the VCI Manager menu on the BT608E for connection via Bluetooth and then you can check the communication status, and upgrade the VCI firmware. It also supports Wi-Fi connection for in-time software update.